
The plugin includes a built-in web interface accessible from your browser. It provides a graphical way to manage devices, monitor the Zigbee network, and configure the plugin without editing configuration files directly.
It opens on the Dashboard, below the menu bar that is shown on every page:

Please refer to Step 3 — Plugin Configuration for instructions on how to enable and access the web interface.
Once configured, the interface is available at:
http://<domoticz-ip>:<port>/z4d/
The port is the one set in the plugin’s hardware parameters (9440 by default).
The menu bar at the top of every page gives access to the following sections:
| Menu | Entries | Purpose |
|---|---|---|
| (plugin name) | — | Dashboard: overview of the plugin, the coordinator and the network. The menu shows the name you gave the plugin hardware in Domoticz. |
| Management | Devices, Groups (tabs) | List, rename and configure the paired devices and the Zigbee groups |
| Network | Topology, Mesh graph (from plugin 9.1.008), Interference level | Neighbour tables of the mesh, the mesh drawn as a graph, and an energy scan of the Zigbee channels |
| Admin | Plugin, Provisionning, Group, Coordinator, Firmware | One page with a status bar and five tabs (from plugin 9.1.009; a drop-down menu before). Plugin: upgrade and restart the plugin. Provisionning: open the network for pairing, full-reset pairing, recreate widgets. Group: ask the routers for their groups. Coordinator: coordinator details, change the Zigbee channel, soft reset (ZiGate). Firmware: device firmware updates (OTA). |
| Settings | — | The plugin settings |
| Tools | Data, Command, Binding / Reporting, Debug, Errors | One page with five tabs (from plugin 9.1.009; before, a drop-down menu with Tools, Command, Reporting, Binding, Debug and Error(s)). Data: view and download the plugin data, and a support bundle for an issue. Command: send commands, or a raw Zigbee frame, to a device. Binding / Reporting: the bindings of a device, and its attribute reporting (zigpy coordinators). Debug: the debug logging settings. Errors: the errors recorded by the plugin. |
| Manufacturer | CASA.iA, ZLinky, TICmeter, Chameleon | Pages dedicated to some devices. The menu only appears when at least one of these devices is paired, and only lists the ones you have. |
| About | — | Plugin version, where to find help (wiki, Domoticz forum, Keybase) and acknowledgements |
On the right of the menu bar:
On a narrow screen the menu collapses behind a ☰ button, and the Accept new hardware switch and the language flag move to the bottom of that menu.
The plugin also sends anonymous usage statistics; what is sent and how to opt out is described on the Statistics page.
The interface appearance may have changed since this documentation was written.