ZigBeeForDomoticZ plugin Wiki
Tuya TS0601 eTRV
Pairing
Host
Device
Comment
Device Annoucement
Read Attribute Basic
0x0004, 0x0000, 0x0001, 0x0005, 0x0007, 0xffe
Active EP request
Simple Descriptor request
Ep 0x01
Write Attribute
Cluster 0x0000, attribut 0xffde, value 0x13
Command 0xf0 on cluster 0x0000
Command 0x03 on Cluster 0xef00
Report Attributes 0x0000 / 0xfffe
Value 0x00
Report Attributes 0x0000 / 0x0001
Value 0x55
Report Attributes 0x0000 / 0xffe2
Value 0x1f
Report Attributes 0x0000 / 0xffe4
Value 0x01
Read Attributes 0x000a / 0x0007
Request Local Time
Command 0x10 on cluster 0xef00
Value 0x0022
Command 0x0b
Value 0x000140
Command 0x01
00 17 0a 01 0001 01
Command 0x01
Data: 00 18 08 01 0001 01
Command 0x24
Data: 0008
Command 0x01
Data: 00 19 82 01 0001 01
Response Command 0x24
Data: 0008 60 0d 80 29 600d8e39
Findings
It is a must to have Default Response Sent for any message received from the device.
Otherwise, the device is looping sending the command 0x65 !
Tuya TS0601 eTRV
Pairing
| Host | Device | Comment |
|---|---|---|
| Device Annoucement | ||
| Read Attribute Basic | 0x0004, 0x0000, 0x0001, 0x0005, 0x0007, 0xffe | |
| Active EP request | ||
| Simple Descriptor request | Ep 0x01 | |
| Write Attribute | Cluster 0x0000, attribut 0xffde, value 0x13 | |
| Command 0xf0 on cluster 0x0000 | ||
| Command 0x03 on Cluster 0xef00 | ||
| Report Attributes 0x0000 / 0xfffe | Value 0x00 | |
| Report Attributes 0x0000 / 0x0001 | Value 0x55 | |
| Report Attributes 0x0000 / 0xffe2 | Value 0x1f | |
| Report Attributes 0x0000 / 0xffe4 | Value 0x01 | |
| Read Attributes 0x000a / 0x0007 | Request Local Time | |
| Command 0x10 on cluster 0xef00 | Value 0x0022 | |
| Command 0x0b | Value 0x000140 | |
| Command 0x01 | 00 17 0a 01 0001 01 | |
| Command 0x01 | Data: 00 18 08 01 0001 01 | |
| Command 0x24 | Data: 0008 | |
| Command 0x01 | Data: 00 19 82 01 0001 01 | |
| Response Command 0x24 | Data: 0008 60 0d 80 29 600d8e39 |
Findings
It is a must to have Default Response Sent for any message received from the device. Otherwise, the device is looping sending the command 0x65 !